Pseudo :
Module(s) souhaité(s) et quantité :
Regroupement :
Hello, your module for lighting and night, can be used for something else, I mean by that is use for an auto ignition headlights depending on the night, as do the vehicles which are equipped?Aha, ok, I think I understand what you want...you want a module which sould be able to ingnite the lights when the daytime is gone, in the evening...or you get into a tunel, underground parking, etc?
It's how the light sensor? whether it is big or not to hide, thank you :)
Il serait bien de faire des vidéo de chaque module en fonctionnement. D'ailleurs ses module seront compatible a 100% avec n'importe clio(clio 1, clio 2, clio 3...) ?The modules are compatible with almost all models or renault and dacia models...I say that because we install on them this modules. On clio 1 the DRL is working, i don't know if FMH can work, but with electrical documentation I can give an a possible solution.
Il le précise dans FMH que c'est en rapport avec UCH et il n'y a pas besoin d'UCH pour du DRL...
Pour le module d'éclairage de nuit, ça va pour les deux ou juste pour un seul côté ? Avant/arrière ?The FMH can connect just with front lights or with both front and rear lights, it's a choice of the owner, the module needs a signal from the lights, can take from projectors, low beam, rear lights or both front and rear.
Aha, ok, I think I understand what you want...you want a module which sould be able to ingnite the lights when the daytime is gone, in the evening...or you get into a tunel, underground parking, etc?
The light sensor you can see it in the first picture, is the size of an led, and the sensibility to light can be adjusted from the blue rheostat.
Peut être intéressé par un module HWM :cyp:Ah tiens :cyp:
More than 5 units = 30 euro/unit; >>> 40In your first message more there is of participants more the price is expensively. :)
More than 10 units = 35 euro/unit;
More than 15 units = 40 euro/unit. >>> 30
Better now no ? the more you sell the lower th price is no ? :lol:
Pseudo :
Module(s) souhaité(s) et quantité :
Regroupement :
Do you use stripboards or true PCBs ?Yes, I used PCBs in the past and I can use from now on, but I need a larger order. I made 30 DRLs once and have it on stock and until I sold them was a great financial effort for my part. For all modules the board will have Lxl = 50x50mm.
Je n'ai pas vu d'infos sur des support de ces circuit, es-ce que les circuit sont distribué dans des boitier étanche ou il faut le faire soit-même ?You don't need waterproof boxes or something else, the modules can be installed on the fuse box (anyway, the connections will be realized on fuses, without cutting or modify neither a wire).
Yes, I used PCBs in the past and I can use from now on, but I need a larger order. I made 30 DRLs once and have it on stock and until I sold them was a great financial effort for my part. For all modules the board will have Lxl = 50x50mm.
And a litlle bit attention!!...in the link you gave 1pcs of 50x50mm is 9,90$!!...not all 10pcs. :)
You don't need waterproof boxes or something else, the modules can be installed on the fuse box (anyway, the connections will be realized on fuses, without cutting or modify neither a wire).
In the picture attached is a drl module fixed with 2 screws on twingo 1 fuxe box. For clio 2 is the same, the modules can be fixed in many positions on fuse box sides. There are a lot of space. I'm for simplicity and maximum efficiency!
For the module which have to be installed in engine bay (ex. drl for clio 3) I can provide a black box made from abs plastic, very good quality (Lxlxh=88x66x33mm).
Pour le HWM aussi une boite est la bienvenue puisqu'il sera coté moteur... Quand je dit étanche c'est dans le sens "humidité" pour les composantsTake for example the HWM...there is 6 wires to connect:
But keep these links in mind, the PCBs quality is good. Since I discovered that website, I order all my 2 and 4 layer PCBs for personnal projects there (if the dimensions match), I can insure you the price includes a set of 10 pcs ;)Ok, I belive you!...since you allready bought from them. On the site, it doesn't mention that 1 pcs. is in reality 10 pcs. united and you have to cut at home.
Take for example the HWM...there is 6 wires to connect:
1. +12v apc
2. +12v signal from low beam
3. signal from windscreen washer command
4. gnd
5. pump
6. pump
(for this application it needs a 2 way pump).
So,...if I install on my clio this module, I'll put it inside and only those 2 wires from pump I'll passed them from the inside in the engine bay.